Tape casting of storage phosphor BaFBr:Eu2+ for X-ray imaging

Hui Li; E. Epelbaum; M. Batentschuk; A. Winnacker

doi:10.1016/S0921-5107(02)00388-4

Tape casting of storage phosphor BaFBr:Eu²⁺ for X-ray imaging

Hui Li
, E. Epelbaum
, M. Batentschuk
, A. Winnacker

Division of Medical Physics

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

Tape casting of BaFBr:Eu²⁺, an important storage phosphor material for X-ray detection was investigated. Rheological measurement, thickness evaluation and scanning electron microscopy were used to monitor the processes. Measurements of the physical imaging performance in terms of modulation transfer function, noise power spectrum and noise equivalent quanta were used to characterize the storage phosphor plates (SPPs). It was found that careful control of the processes, especially the optimization of the dispersants, resulted in superior SPPs with excellent packing structure and lowest structure noise. Measurements with a commercial Guinier Camera were also presented.

Original language	English
Pages (from-to)	313-319
Number of pages	7
Journal	Materials Science and Engineering B: Solid-State Materials for Advanced Technology
Volume	96
Issue number	3
DOIs	https://doi.org/10.1016/S0921-5107(02)00388-4
State	Published - Dec 1 2002

Keywords

BaFBr:Eu
Photostimulated luminescence
Storage phosphor
Tape casting

Access to Document

10.1016/S0921-5107(02)00388-4

Cite this

@article{0435a11640f24a40886fec16fad47536,

title = "Tape casting of storage phosphor BaFBr:Eu2+ for X-ray imaging",

abstract = "Tape casting of BaFBr:Eu2+, an important storage phosphor material for X-ray detection was investigated. Rheological measurement, thickness evaluation and scanning electron microscopy were used to monitor the processes. Measurements of the physical imaging performance in terms of modulation transfer function, noise power spectrum and noise equivalent quanta were used to characterize the storage phosphor plates (SPPs). It was found that careful control of the processes, especially the optimization of the dispersants, resulted in superior SPPs with excellent packing structure and lowest structure noise. Measurements with a commercial Guinier Camera were also presented.",

keywords = "BaFBr:Eu, Photostimulated luminescence, Storage phosphor, Tape casting",

author = "Hui Li and E. Epelbaum and M. Batentschuk and A. Winnacker",

note = "Funding Information: This work was supported by the Bavarian Research Foundation (FOROB). We are grateful to Dr M. Nippus (Huber Diffractionstechnik GmbH, Germany) for the measurements with a Guinier Camera 670.",

year = "2002",

month = dec,

day = "1",

doi = "10.1016/S0921-5107(02)00388-4",

language = "English",

volume = "96",

pages = "313--319",

journal = "Materials Science and Engineering B: Solid-State Materials for Advanced Technology",

issn = "0921-5107",

number = "3",

}

TY - JOUR

T1 - Tape casting of storage phosphor BaFBr:Eu2+ for X-ray imaging

AU - Li, Hui

AU - Epelbaum, E.

AU - Batentschuk, M.

AU - Winnacker, A.

N1 - Funding Information: This work was supported by the Bavarian Research Foundation (FOROB). We are grateful to Dr M. Nippus (Huber Diffractionstechnik GmbH, Germany) for the measurements with a Guinier Camera 670.

PY - 2002/12/1

Y1 - 2002/12/1

N2 - Tape casting of BaFBr:Eu2+, an important storage phosphor material for X-ray detection was investigated. Rheological measurement, thickness evaluation and scanning electron microscopy were used to monitor the processes. Measurements of the physical imaging performance in terms of modulation transfer function, noise power spectrum and noise equivalent quanta were used to characterize the storage phosphor plates (SPPs). It was found that careful control of the processes, especially the optimization of the dispersants, resulted in superior SPPs with excellent packing structure and lowest structure noise. Measurements with a commercial Guinier Camera were also presented.

AB - Tape casting of BaFBr:Eu2+, an important storage phosphor material for X-ray detection was investigated. Rheological measurement, thickness evaluation and scanning electron microscopy were used to monitor the processes. Measurements of the physical imaging performance in terms of modulation transfer function, noise power spectrum and noise equivalent quanta were used to characterize the storage phosphor plates (SPPs). It was found that careful control of the processes, especially the optimization of the dispersants, resulted in superior SPPs with excellent packing structure and lowest structure noise. Measurements with a commercial Guinier Camera were also presented.

KW - BaFBr:Eu

KW - Photostimulated luminescence

KW - Storage phosphor

KW - Tape casting

UR - https://www.scopus.com/pages/publications/0036897336

U2 - 10.1016/S0921-5107(02)00388-4

DO - 10.1016/S0921-5107(02)00388-4

M3 - Article

AN - SCOPUS:0036897336

SN - 0921-5107

VL - 96

SP - 313

EP - 319

JO - Materials Science and Engineering B: Solid-State Materials for Advanced Technology

JF - Materials Science and Engineering B: Solid-State Materials for Advanced Technology

IS - 3

ER -

Tape casting of storage phosphor BaFBr:Eu²⁺ for X-ray imaging

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this