Simulation of secondary and separated flow in a diffusing S-duct

The focus of this paper is on the numerical simulation of compressible flow in a diffusing S-duct inlet; this flow is characterized by secondary flow as well as regions of boundary layer separation. The S-Duct geometry produces streamline curvature and an adverse pressure gradient resulting iu these flow characteristics. Two S-duct geometries are employed in this investigation-one is used iu an experimental study conducted at NASA Glenn Research Center in the early 1990's and the other is a benchmark configuration proposed by AIAA Propulsion Aerodynamics Workshop (PAW) to assess the accuracy and best practices of CFD solvers.JTlie CFD flow solver ANSYS-FLUENT is employed in the investigation of compressible turbulent flow through the S-duct. A second-order accurate, steady, density-based solver is employed in a finite-volume framework. The three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equations are solved on a structured mesh with a number of turbulence models, namely the Spalart - Alimaras (SA), k-ε, k-ω SST, and Transition SST models, and the results are compared with the available experimental data. The computed results capture the flow field and pressure recovery with acceptable accuracy when compared to the experimental data. The turbulence model giving the best results is identified.