Effect of water chemistry on the dissolution rate ofthe lead corrosion product hydrocerussite

Hydrocerussite (Pb₃(CO₃)₂(OH)₂) is widely observed as a corrosion product in drinking water distribution systems. Its equilibrium solubility and dissolution rate can control lead concentrations in drinking water. The dissolution rate of hydrocerussite was investigated as a function of pH, dissolved inorganic carbon (DIC), and orthophosphate concentrations at conditions relevant to drinking water distribution using continuously stirred tank reactors (CSTRs). In the absence of DIC and orthophosphate, the dissolution rate decreased with increasing pH. Addition of DIC inhibited the dissolution of hydrocerussite. The addition of orthophosphate significantly decreased the dissolution rate of hydrocerussite. At conditions with orthophosphate and without DIC, a lead(II) phosphate solid hydroxylpyromorphite (Pb₅(PO₄)₃OH) was observed after reaction, and orthophosphate's inhibitory effect can be attributed to the formation of this low-solubility lead(II) phosphate solid. In the presence of both orthophosphate and DIC, no lead(II) phosphate solid was observed, but the rate was still lowered by the presence of orthophosphate, which might be due to the adsorption of orthophosphate to block reactive sites on the hydrocerussite surface. For systems in which hydroxylpyromorphite was present, the steady-state effluent lead concentrations from the CSTRs were close to the predicted equilibrium solubility of hydroxylpyromorphite. In the absence of orthophosphate rapid equilibration of hydrocerussite was observed.