Design and implementation of an intelligent CAD system

M. J. Jakiela; P. Y. Papalambros

doi:10.1115/DETC1987-0044

Design and implementation of an intelligent CAD system

M. J. Jakiela
, P. Y. Papalambros

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

System requirements and system design for integrating a production rule program and a computer aided design system are presented. An implementation using a commercially available graphicsmodeling system is described. A "suggestive mode" interface is programmed as an example with application to design for automatedassembly. Initial use of the implementation indicates that encodingproduction rules is more difficult than with conventional text-onlyknowledge-based systems, but that this system is a more effectiveway to use artificial intelligence techniques in design.

Original language	English
Title of host publication	Design Methods, Computer Graphics, and Expert
Publisher	American Society of Mechanical Engineers (ASME)
Pages	339-345
Number of pages	7
ISBN (Electronic)	9780791897737
DOIs	https://doi.org/10.1115/DETC1987-0044
State	Published - 1987
Event	ASME 1987 Design Technology Conferences, DETC 1987 - Boston, United States Duration: Sep 27 1987 → Sep 30 1987

Publication series

Name	Proceedings of the ASME Design Engineering Technical Conference
Volume	1

Conference

Conference	ASME 1987 Design Technology Conferences, DETC 1987
Country/Territory	United States
City	Boston
Period	09/27/87 → 09/30/87

Access to Document

10.1115/DETC1987-0044

Cite this

@inproceedings{30d040f197f64249a40daecdb7021b33,

title = "Design and implementation of an intelligent CAD system",

abstract = "System requirements and system design for integrating a production rule program and a computer aided design system are presented. An implementation using a commercially available graphicsmodeling system is described. A {"}suggestive mode{"} interface is programmed as an example with application to design for automatedassembly. Initial use of the implementation indicates that encodingproduction rules is more difficult than with conventional text-onlyknowledge-based systems, but that this system is a more effectiveway to use artificial intelligence techniques in design.",

author = "Jakiela, \{M. J.\} and Papalambros, \{P. Y.\}",

note = "Publisher Copyright: {\textcopyright} 1987 American Society of Mechanical Engineers (ASME). All rights reserved.; ASME 1987 Design Technology Conferences, DETC 1987 ; Conference date: 27-09-1987 Through 30-09-1987",

year = "1987",

doi = "10.1115/DETC1987-0044",

language = "English",

series = "Proceedings of the ASME Design Engineering Technical Conference",

publisher = "American Society of Mechanical Engineers (ASME)",

pages = "339--345",

booktitle = "Design Methods, Computer Graphics, and Expert",

}

Jakiela, MJ & Papalambros, PY 1987, Design and implementation of an intelligent CAD system. in Design Methods, Computer Graphics, and Expert. Proceedings of the ASME Design Engineering Technical Conference, vol. 1, American Society of Mechanical Engineers (ASME), pp. 339-345, ASME 1987 Design Technology Conferences, DETC 1987, Boston, United States, 09/27/87. https://doi.org/10.1115/DETC1987-0044

Design and implementation of an intelligent CAD system. / Jakiela, M. J.; Papalambros, P. Y.
Design Methods, Computer Graphics, and Expert. American Society of Mechanical Engineers (ASME), 1987. p. 339-345 (Proceedings of the ASME Design Engineering Technical Conference; Vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and implementation of an intelligent CAD system

AU - Jakiela, M. J.

AU - Papalambros, P. Y.

PY - 1987

Y1 - 1987

N2 - System requirements and system design for integrating a production rule program and a computer aided design system are presented. An implementation using a commercially available graphicsmodeling system is described. A "suggestive mode" interface is programmed as an example with application to design for automatedassembly. Initial use of the implementation indicates that encodingproduction rules is more difficult than with conventional text-onlyknowledge-based systems, but that this system is a more effectiveway to use artificial intelligence techniques in design.

AB - System requirements and system design for integrating a production rule program and a computer aided design system are presented. An implementation using a commercially available graphicsmodeling system is described. A "suggestive mode" interface is programmed as an example with application to design for automatedassembly. Initial use of the implementation indicates that encodingproduction rules is more difficult than with conventional text-onlyknowledge-based systems, but that this system is a more effectiveway to use artificial intelligence techniques in design.

UR - https://www.scopus.com/pages/publications/85104758095

U2 - 10.1115/DETC1987-0044

DO - 10.1115/DETC1987-0044

M3 - Conference contribution

AN - SCOPUS:85104758095

T3 - Proceedings of the ASME Design Engineering Technical Conference

SP - 339

EP - 345

BT - Design Methods, Computer Graphics, and Expert

PB - American Society of Mechanical Engineers (ASME)

T2 - ASME 1987 Design Technology Conferences, DETC 1987

Y2 - 27 September 1987 through 30 September 1987

ER -

Design and implementation of an intelligent CAD system

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this